Shackee
01-13-2005, 11:12 AM
Hey everybody,
I just picked up my 2004 Mazda6 on Tuesday. (5 Door, Black w/ Black cloth interior, Bose sound system, and Autodim Mirror /Compass) The car is absolutely perfect except for the compass. It never says any directions other than "SE", "S", or "SW". I stopped by the dealer, but the service dept. was already closed. Two of the salesman tried to help me out by telling me to "drive around in clockwise circle" and supposedly, that would help the system "get it's bearings". But, they weren't sure if I needed to hold down any of the buttons first to tell it that I'm trying to program it.
When I hold down the button on the left (that turns on and off the autodim feature), after about 3 seconds it displays "CAL" vertically next to the direction. I assumed that meant calibrate, but didn't seem to work. If I hold down the other button (that is used to turn the compass on or off) the display reads "ZONE" vertically next to a number. If I repeatedly push that button, the "zone" number changes from 1 through 15. I've tried all 15 settings, but none of them seem to help.
I've done a lot of rotations now (both clockwise and counter-clockwise) and I'm starting to get dizzy over this issue. (Literally) If anyone can tell me how to reprogram the compass, I would greatly appreciate it!!!
I just picked up my 2004 Mazda6 on Tuesday. (5 Door, Black w/ Black cloth interior, Bose sound system, and Autodim Mirror /Compass) The car is absolutely perfect except for the compass. It never says any directions other than "SE", "S", or "SW". I stopped by the dealer, but the service dept. was already closed. Two of the salesman tried to help me out by telling me to "drive around in clockwise circle" and supposedly, that would help the system "get it's bearings". But, they weren't sure if I needed to hold down any of the buttons first to tell it that I'm trying to program it.
When I hold down the button on the left (that turns on and off the autodim feature), after about 3 seconds it displays "CAL" vertically next to the direction. I assumed that meant calibrate, but didn't seem to work. If I hold down the other button (that is used to turn the compass on or off) the display reads "ZONE" vertically next to a number. If I repeatedly push that button, the "zone" number changes from 1 through 15. I've tried all 15 settings, but none of them seem to help.
I've done a lot of rotations now (both clockwise and counter-clockwise) and I'm starting to get dizzy over this issue. (Literally) If anyone can tell me how to reprogram the compass, I would greatly appreciate it!!!