Mazda Forum - Photo Galleries - Create an Account


Go Back   Mazda Forum - Mazda Enthusiast Forums > Mazda Vehicles > Mazda Millenia


Reply
 
Thread Tools Search this Thread
  #1  
Old 11-20-2008, 08:44 PM
Kasstastrophy Kasstastrophy is offline
Junior Member
 
Join Date: Aug 2008
Location:
Posts: 19
Send a message via Yahoo to Kasstastrophy
Default How To: Fixing a missing radio code.

If you are like me, you possibly might have the nice Panasonicradio that requires a code to be inputed if it lost power. Now, if your really like me... you didn"t have the code needed. Here are the steps to reclaiming your tunes and your sanity.

If you know the Owner"s Code, a four-digit code, the instructions are fairly simple:

STEP 1: Turn the ignition to ACC

STEP 2: Briefly and simultaneously press both SEARCH and AUTO-M. This action should change the display from a blinking code to a solid .

STEP 3: Using the radio preset buttons 1, 2, 3, and 4, set the Owner"s Code in the display. The first position can be set using the 1 button, the second using the 2 button, etc.

STEP 4: Press and hold both SEARCH and AUTO-M until you hear a loud beep and the display shows good. The radio will then turn off, and you are ready to start listening again.

If you don"t know the Owner"s Code, the instructions are similar.

The first goal is to get the display to flash"ERR" instead of code. Then you can enter the Dealer Code to reset the radio. Here are the steps:

STEP 1: Turn the ignition to ACC

STEP 2: Briefly and simultaneously press both SEARCH and AUTO-M. This action should change the display from a blinking code to a solid.

STEP 3: Using the radio preset buttons 1, 2, 3, and 4, set any four-digit code in the display. The first position can be set using the 1 button, the second using the 2 button, etc.

STEP 4: Press and hold both SEARCH and AUTO-M. If by some chance you guessed the Owner"s Code, there will be a loud beep and the display will show good before the radio turns off. If this happens, you are done. More likely, the display will briefly show"ERR" and then change back to the flashing code.

STEP 5: Repeat steps 1-4 until you have a flashingERR instead of a flashing code.

STEP 6: Press the following buttons in sequence: SEARCH, AM, AUTO-M, FM 1/2. The display should now show .

STEP 7: Set the code to 4989 using the preset buttons, as before.

Press and hold both SEARCH and AUTO-M until you hear a loud beep and the displayflashes good. The radio will then turn off, and you are ready to start listening again.


This will speed you on your way to getting your radio back!

-Kass
Register today for free or log-in if already registered to remove this ad!
__________________
"No matter the obstacle big or small, it can easily be overcome with large amounts of high explosive."
Reply With Quote
  #2  
Old 11-21-2008, 12:53 PM
virgin1's Avatar
virgin1 virgin1 is offline
Super Moderator
2004 Mazda Mazda3
 
Join Date: Mar 2007
Location: Austin, TX
Posts: 6,612
Default RE: How To: Fixing a missing radio code.

EXCELLENT write-up, Kass!! Excellent job.

FAQed and Stickied!!
__________________

"There is no tool you can buy that will replace experience." - Josh Mills, C.K.DeLuxe
Fighting natural selection one moron at a time....
"When we blindly adopt a religion, a political system, a literary
dogma, we become automatons. We cease to grow." - Anais Nin
Reply With Quote
  #3  
Old 12-21-2008, 12:10 PM
chargit chargit is offline
 
Join Date: Dec 2008
Posts: 2
Default RE: How To: Fixing a missing radio code.

Wow, this is very good info. I am a used car dealer and this happens alot on the lot. a battery runs down, or is replaced and bam!

Thanks a bunch!

Tracy
Reply With Quote
  #4  
Old 10-22-2009, 02:46 PM
keninn keninn is offline
Senior Member
 
Join Date: Sep 2005
Location:
Posts: 533
Default

great for 95-96. 97- no code needed.
Reply With Quote
Reply

Tags
2008, 323, code, display, fd, lost, makes, mazda, millina, radio, resetting, rx7, rx8, stereo, turn


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Advertising

Featured Sponsors
New Sponsors
Med Center Mazda
Pelham, AL 35235


All times are GMT -5. The time now is 12:47 AM.

© Internet Brands, Inc.

Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.