B2600i wont start ???
#13
RE: B2600i wont start ???
Ok. i cant find the ignitor or pick up coil in my haynes manual. i replaced the donut shaped disk in the bottom of the coil with no improvement. which one is the what does the ignitor and pick up coil look like. thanks dwb
#14
RE: B2600i wont start ???
The filiment on the main feul inj. fuse is unbroken and seems ok. i can hear the relay click when i turn the key on. does this mean it is ok? I tested the 2 inner prongs on the connector that comes out of the front side of the distributor and got 4.5 M ohms. this is what i replaced with the one i got from the junk yard. the orignal one also tests at 4.6 M ohms. does this need replaced with an oem one? Thanks...
#15
RE: B2600i wont start ???
do you know how to test the main relay to see if power is going past it. it clicks when i turn the key but i think this is my next component to eliminate to see why this truck wont start.
thanks.
dwb
thanks.
dwb
Thread
Thread Starter
Forum
Replies
Last Post
hugh2293
Mazda BT 50 & Pickup Trucks
1
09-29-2009 07:37 PM
acflye
Mazda BT 50 & Pickup Trucks
1
04-15-2007 12:51 PM