Exhaust backfire after Weber swap
#12
11-26-2022 | 07:58 AM
Senior Member
Joined: Mar 2007
Posts: 1,117
From: Arizona
It's going to be either 6mm x 1.0mm thread, or 8mm x 1.25mm thread.
But measure the depth of the intake manifold hole, make sure NOT to buy a bolt that's too LONG, as then you might crack the intake manifold when tightening. Make sure to allow for like 2mm of safety.
But measure the depth of the intake manifold hole, make sure NOT to buy a bolt that's too LONG, as then you might crack the intake manifold when tightening. Make sure to allow for like 2mm of safety.
#13
11-27-2022 | 06:42 PM
Thread Starter
|
Member
Joined: Apr 2022
Posts: 72
From: Washington
Alright, thanks Cusser.
Thread
Thread Starter
Forum
Replies
Last Post
dkofoed
Mazda BT 50 & Pickup Trucks
4
09-22-2009 08:46 AM
