How to Install ECM on 1986 Mazda B2000
#12
Nice job finding that. I forget that EGR is an issue, mine is factory EFI (fuel injected) which has no EGR.
CO is directly related to a/f mixture. If the HC levels are good, the engine is running well....just a little rich and reading high CO. You can try to lean it out a little but make sure you count your turns on the mixture screw just incase you go in the wrong direction. If you lean it out too much your NOx levels will rise.
CO is directly related to a/f mixture. If the HC levels are good, the engine is running well....just a little rich and reading high CO. You can try to lean it out a little but make sure you count your turns on the mixture screw just incase you go in the wrong direction. If you lean it out too much your NOx levels will rise.
Last edited by Spacemonkee23; 07-15-2014 at 11:19 AM.
Thread
Thread Starter
Forum
Replies
Last Post
compression
Mazda BT 50 & Pickup Trucks
3
06-28-2007 11:14 PM