Mazda BT 50 & Pickup Trucks While Mazda may not be known for their trucks, they have always produced quality reliable trucks for both hauling cargo, or simply crusing. BT 50

Weber Convo's

Thread Tools
 
Search this Thread
 
  #11  
Old 02-13-2008 | 05:07 AM
Cusser's Avatar
Senior Member
Joined: Mar 2007
Posts: 1,117
From: Arizona
Default RE: Weber Convo's

The Weber electric choke wire plugs into the rear of the alternator, not sure of the color as it's nighttime here. You can either run the EGR vacuum directly or off the water valve or not at all or make an EGR block-off plate. The EGR valve itself will function as a block off plate if there's no vacuum to it, and its internal spring-loaded valve is closed.
 
  #12  
Old 02-20-2008 | 09:10 PM
mtvjackass74's Avatar
Junior Member
Joined: May 2007
Posts: 15
Default RE: Weber Convo's

[align=left]yea, i just put a weber on my 87 mazda and i love it! wish i did this 2 yrs ago when i put my new motor in. easy install, did have to throw on a fuel regulator. check it out on YOUTUBE weber mazda. also have a 38 weber for sell for mazda pickup, asking 320.00........still new in the box, paid over 400.00. i opted for the 32/36 since mpg is a issue for me, (work truck) 38 does seem to like the gas a little more, but from what i heard, turns that 4 into a 6. [/align][align=left] [/align]
 
  #13  
Old 02-22-2008 | 08:52 PM
TheMercuyMan's Avatar
Joined: Feb 2008
Posts: 1
Default RE: Weber Convo's

just bought a 87b2600 4x4 installed the 34 dgec didnt want to spend the extra money on a $300 truck for the 38. seems to run fine it has 33s on the rear and 31s on the front way too big on the back.
 
  #14  
Old 03-17-2008 | 02:06 PM
Wookie_vw_golf's Avatar
Joined: Mar 2008
Posts: 2
Default RE: Weber Convo's

I just threw my weber on and it still hasn't even seen the road
 
  #15  
Old 03-17-2008 | 08:34 PM
tnerb's Avatar
Joined: Mar 2008
Posts: 34
Default RE: Weber Convo's

I am fairly pissed at webber. the jets they gave me are not for my altitude and I have the idle mixture screw out eight turns, it should be two at the max is says. ******** now I have to buy a jet kit. for a hundred dollars . and dick around with it. better be worth it. wont even idle until its warm and spits and chugs even after that. thats when im at stop light or whatnot in gear.. just pissed off becuase there instructions are horrible, they have you grind an adapter plate and well, the jetting. F00ey !
 
  #16  
Old 03-20-2008 | 10:51 PM
tnerb's Avatar
Joined: Mar 2008
Posts: 34
Default RE: Weber Convo's

actually its not my jets. they might be fine. I think i was stupid and did not get all the vaccum hoses. I pluged a couple with my finger and it did stuff to the engine. My bad, weber might be a great carb but the instructinos are ****. i mean come on, fax copy stappled together instructions ? a lot can be done in that department. but I am just happy my truck is going now. synthetic oil stopped a lot of the smoke. as well as the vac hoses being plugged
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
HITDOGG
Mazda BT 50 & Pickup Trucks
9
05-13-2018 12:06 PM
Lowboy86
Mazda BT 50 & Pickup Trucks
4
07-30-2007 05:48 AM
eflores
Mazda BT 50 & Pickup Trucks
7
03-13-2007 02:39 PM
bryan26
Mazda BT 50 & Pickup Trucks
2
06-27-2006 01:15 PM
varbcorp
Mazda BT 50 & Pickup Trucks
4
06-19-2006 03:43 AM




All times are GMT -5. The time now is 10:49 PM.