CX-5 code p0101 and warning lights
#11
Hi, did you ever get to the bottom of this issue? I'm having the exact same issue and I'm reaching the end of my tether. I've checked for vacuum leaks, battery load, changed maf, exhaust pressure, and dpf pressure sensors. Cleaned the map sensor all to no avail. If you have any info I would be so grateful.
Kind regards,
Andy
Kind regards,
Andy
Send me your number i call you
i did everything wath you did and more but waiting on 1 part on thursday i hope its help
#12
Kind regards
Andy
#13
andy find pg auto stop in google and call me
#16
P0101
Hello! I have the same problem in the same condition (the main error P0101). I cleaned throttle box, replaced the sensors MAF & MAP. I still have the error, when I remove the foot from the throttle pedal, and the engine reaches about 2000 rot/min. Did you solve the problem??
#17
Hello! I have the same problem in the same condition (the main error P0101). I cleaned throttle box, replaced the sensors MAF & MAP. I still have the error, when I remove the foot from the throttle pedal, and the engine reaches about 2000 rot/min. Did you solve the problem??
#18
Multiple errors occurs on deaceleration
Anybody found solution for this issue?
I have the same problem with my mazda cx-5, 2016 2.2 D, AWD. Multiple errors occurs on deaceleration from 110-120km/h.
Engine goes to service mode. Mazda dealer asked 1300Eur to cleaning intake manifold, egr, Other service did jobe for less.
4 glases of carbon were discovered !! Unfortunately problem still left. Any ideas?
Attached link to cleaning procedure I found on youtube:
I have the same problem with my mazda cx-5, 2016 2.2 D, AWD. Multiple errors occurs on deaceleration from 110-120km/h.
Engine goes to service mode. Mazda dealer asked 1300Eur to cleaning intake manifold, egr, Other service did jobe for less.
4 glases of carbon were discovered !! Unfortunately problem still left. Any ideas?
Attached link to cleaning procedure I found on youtube:
Last edited by Mindaugas Bene; 01-30-2022 at 06:35 AM. Reason: added pictures
#19
Anybody found solution for this issue?
I have the same problem with my mazda cx-5, 2016 2.2 D, AWD. Multiple errors occurs on deaceleration from 110-120km/h.
Engine goes to service mode. Mazda dealer asked 1300Eur to cleaning intake manifold, egr, Other service did jobe for less.
4 glases of carbon were discovered !! Unfortunately problem still left. Any ideas?
Attached link to cleaning procedure I found on youtube:
https://www.youtube.com/watch?v=7yaN...st=WL&index=33
I have the same problem with my mazda cx-5, 2016 2.2 D, AWD. Multiple errors occurs on deaceleration from 110-120km/h.
Engine goes to service mode. Mazda dealer asked 1300Eur to cleaning intake manifold, egr, Other service did jobe for less.
4 glases of carbon were discovered !! Unfortunately problem still left. Any ideas?
Attached link to cleaning procedure I found on youtube:
https://www.youtube.com/watch?v=7yaN...st=WL&index=33
#20
Mazda CX-5 2.2 Diesel 150 mp, 2015
I had the same problem. I cleaned up intake manifold, EGR valve and Throttle valve. Everything was very dirty with carbon soot. Then, at a Mazda service station, they checked for the wear of the camshafts. It is mandatory to clean MAP sensor. Finally, the motor computer software is update.
These are the steps to check for error P0101. I don't have a problem 200 miles now.
These are the steps to check for error P0101. I don't have a problem 200 miles now.