Grille section replacement
#3
Laurence,
As grim_reaper mentioned, the whole bumper needs to come off. I've done this to replace the horns but it's not that difficult. Yours might even be easier since I only see parking sensors and no fog lamps or sensors behind the Mazda emblem. This equates to likely just one wiring harness that needs to be unplugged before the entire bumper cover comes off.
I've attached an official Mazda guide in case you're inclined to proceed. Several items in the guide won't apply to you - which makes it easier. You can certainly do this on your own without assistance.
-N-
As grim_reaper mentioned, the whole bumper needs to come off. I've done this to replace the horns but it's not that difficult. Yours might even be easier since I only see parking sensors and no fog lamps or sensors behind the Mazda emblem. This equates to likely just one wiring harness that needs to be unplugged before the entire bumper cover comes off.
I've attached an official Mazda guide in case you're inclined to proceed. Several items in the guide won't apply to you - which makes it easier. You can certainly do this on your own without assistance.
-N-
Last edited by normandelli; 02-15-2023 at 03:43 PM.
Thread
Thread Starter
Forum
Replies
Last Post