Grinding bearings when stopping?
#1
05-06-2011 | 05:01 AM
Thread Starter
|
Junior Member
Joined: May 2011
Posts: 1
Grinding bearings when stopping?
My 2004 Ttibute makes grinding, crunching noises coming from the front end while stopping. It's not the front brakes - checked the rotors and pads which are fine. It doesn't do it all the time, but it seems to occur most often while stopping from a higher speed drive. It doesn't happen in reverse, and it sounds like it is coming from the bottom center of the front end. I am truly befuddled as to what this could be, because pulling and twisting on the axle and joints don't produce the same noises. Can anybody give me a clue?
#2
05-25-2011 | 09:47 PM
Junior Member
Joined: May 2011
Posts: 1
My 2004 Ttibute makes grinding, crunching noises coming from the front end while stopping. It's not the front brakes - checked the rotors and pads which are fine. It doesn't do it all the time, but it seems to occur most often while stopping from a higher speed drive. It doesn't happen in reverse, and it sounds like it is coming from the bottom center of the front end. I am truly befuddled as to what this could be, because pulling and twisting on the axle and joints don't produce the same noises. Can anybody give me a clue?
Thread
Thread Starter
Forum
Replies
Last Post
