Hi all, new Mazda owner here looking for some knowledge.

I want to setup my key FOB so that I only need to press unlock once for all the doors to unlock instead of pressing twice. This is stated in the owners manual so I know it's possible: The system can be set to unlock all doors by performing a single operation. Refer to Personalization Features on page 9-12.

I did find the setup procedure in the owners manual but nowhere does it say which function number I need to select in order to get the desired result:

1. Switch the ignition off and close all of the doors and the liftgate/trunk
lid.
2. Open the driver's door.
3. Within 30 seconds of opening the driver's door, press and hold the
UNLOCK button on the key for 5 seconds or longer. The sound of the doors locking/unlocking can be heard.
After this, the system switches the setting of pressing the driver's request switch once or twice to unlock all doors and the liftgate each time the UNLOCK button is pressed (the sound of the doors
locking/unlocking can be heard).
4. The setting change is completed by doing any one of the following:
- Switching the ignition to ACC or ON.
- Closing the driver's door.
- Opening the liftgate/trunk lid.
- Not operating the key for 10 seconds.
- Pressing any button except the UNLOCK button on the key.
- Pressing a request switch.

Has anyone done this already and if so how many times did you press the unlock button to get the correct fuction?

Cheers!

 

Oops! I lost part of my title and I didnt notice before I did submit. If possible, Can an admin change it to "2015 Mazda 3 Sport - One press key FOB unlock all doors".

Thanks!