Hello,
I have a few problems with my central locking system.
The problems started just recently right after I took apart my driver's doors, in which the locking mechanism's spring broke.
After fixing the spring and putting the doors back together, the following problems have came up:
1. When I try to lock doors via remote, while any of the doors are open, the doors remain locked, although it should lock and unlock right away
(the car does not "blink" with signal lights when any of the doors are open, it does blink when doors are closed and car is locked via remote)
2. When I lock via the manual lock from driver's position, only the driver's doors are lock, but all the doors should lock when manually locking from inside
Thank you all for any advice on what is wrong.

My car:
Mazda 6 (European, steering on left)
2.0 diesel 100 kW
y.2003

 

Im guessing you need a new drivers door actuator.

 

Thanks for the tip.
I forgot to mention, that when I insert the key into the doors and lock with key, all the doors lock normally...