79 mazda courier swap to rotary power?
#1
79 mazda courier swap to rotary power?
i have a 79 courier with the 2.0l and 5 spd std trans. i want to swap in a rotory engine and need to know if there are any rotary engiens that will allow me to use my existing transmision or if ill need to get one from a car?
#2
i don't think that the bolts will line up if you keep the same trans. you can find a motor and transmission for pretty cheap as a combo. the motor may need a rebuild, but you can find people who will rebuild it for you. make sure that you get a package that is complete with the starter, trans, motor, etc. so that you can make a fairly clean swap.
this swap has been done a lot and i think that there are plenty of people who can help you out. e-mail dan@atkinsrotary.com and tell him what you are trying to do. he will help you out with motor mounts, engine management, and general tuning. he has a supercharged, rotary-swapped b-series pick-up.
this swap has been done a lot and i think that there are plenty of people who can help you out. e-mail dan@atkinsrotary.com and tell him what you are trying to do. he will help you out with motor mounts, engine management, and general tuning. he has a supercharged, rotary-swapped b-series pick-up.
#3
i thought about swapping a v8 but those are way to common. lots of people (who have very very limited experience with rotary engines) tell me they are junk because they dont last long and require very special care?
#4
I don't claim to be a rotary expert. I've driven a 2005 RX-8 for about 5 years and nearly 80K miles. I've had no problems with the engine. I haven't raced it and a lot of those miles are easy highway miles. But I think if you keep up with oil changes and the other routine maintainence tasks, a rotary can be as reliable as a piston engine.
#5
ok the engine bit the dust idk how or why just use i gues i was on main st pullin away from a lite and when i went for 3rd gear it started knocking hard. i started the truck the next day to move it and it was fine just had a dead cylinder whats up lol
Thread
Thread Starter
Forum
Replies
Last Post
Paulonthecoast
General Tech
0
03-01-2014 05:40 AM
Victor200
Mazda BT 50 & Pickup Trucks
1
11-19-2007 01:24 PM